Name Of Machine | : | GOLD MOTION |
Type | : | AUTOMATIC POLISHING ROBOT |
Voltage/Frequency | : | 380 V / 50 Hz |
Polishing Motors | : | 2.2 KW 2800 rpm (2 pieces) |
Vacuum Motors | : | 1.1 KW 1.5 Hp (2 pieces) |
Filter Number | : | 2 |
Bag Number | : | 2 |
Workable Material Diameter | : | 11-76 mm |
Pressure | : | 7-8 bar |
Axis | : | 5×2=10 Servo 2 Step Motors |
Brush Stations | : | 16 pieces |
Monitör | : | 10.4′ Touch Panel |
Wireless Connection | : | Siemens GSM Modem |
Weight | : | 750 Kg (1.653 CFM) |
Diemensions | : | 185h x 113w x 237d cm (72h x 44w x 93d inch) |
Information
Descriptions
Mechanical parts and software is a product created by our own engineers. With this machine, the inner and outer polishes of the round products such as rings and bracelets and lap are performed.
The robot can automatically remove all dimensions of the product itself, thus limiting the operator during proces.
There are also 8 brush stations that will polish the inside of the machine and realize the finish of the exterior.
So you can run 16 different brushes at the same time. From the control panel, the operator can determine which brush can go in the order, how much time he can spend in the brush, what movements he can do in the brush, and which direction the brush can make, which means that the machine covers all movements that can be done by the human hand.
The machine is completely enclosed so that 100% close ramat ratio can be obtained.